Energy / WORLD

France changes how Tempo red days are selected, excludes 24 and 31 December

A 21 October CRE decision changes red-day selection for the Tempo electricity tariff and excludes 24 and 31 December. The new algorithm begins on 1 November 2026; earlier notice starts a year later.

Reading sizeSources ↓Share story ↗
Conceptual illustration of electricity generation, storage and connected data.Illustration
Symbolic illustration

France’s energy regulator CRE changed how red days are selected for the Tempo electricity tariff and barred 24 and 31 December from being chosen as red days. The decision is dated 21 October and was posted on the CRE website on 22 October. The new selection method takes effect on 1 November 2026, for the coming winter. White days will continue to use the existing algorithm; the change applies only to the selection of the 22 red days.

The decision follows complaints about the distribution of red days during the 2025–2026 winter. CRE recorded 13 consecutive red working days in March, excluding weekends, and a red day on 31 December. In tests, the new method produced similar efficiency to the old method in a simulation of the last four winters while showing fewer “apurement” days. Those are retrospective and scenario-based evaluations; they are not a guarantee of lower household bills or an evenly distributed sequence every winter.

What the Tempo signal does

Tempo is a demand-response signal used in regulated electricity sales tariffs. Days are classified red, white or blue; red days signal periods of higher system stress during winter. CRE’s decision says the Tempo option has been offered since 1998 and that about 900,000 residential and non-residential customers used the signal in 2025. The regulator also says it appears in some offers from alternative suppliers.

RTE has selected red days since 2014. The earlier method sought days with high residual consumption: electricity use remaining after subtracting output that cannot be controlled. That measure changes with weather and renewable generation. CRE cited the transformation of the power system and a new capacity mechanism in asking for the red-day signal to align with the algorithm used to select “peak period” days. White-day selection is not part of this change.

What happened last winter

CRE’s retrospective review says 13 red working days in a row were selected in March 2025–2026, excluding weekends, to reach the required total of 22 red days. The regulator said those were not days with high residual consumption. 31 December was also selected despite high residual consumption, prompting dissatisfaction over a red day on New Year’s Eve. CRE lists these cases among the decision’s reasons; it does not calculate the price effect for every day of the winter.

CRE assessed selection efficiency by comparing residual consumption on the 22 days selected by each algorithm with residual consumption on the 22 highest-consumption days. In a simulation of the four most recent completed winters, the peak-period algorithm had an efficiency ratio of 94%, compared with 95% for the old Tempo algorithm. The one-point difference measures how well selected days capture high system load; it is not a customer savings rate or a change in electricity bills.

The new algorithm and monthly balancing

CRE directed RTE to apply the capacity mechanism’s peak-period algorithm to red days. A peak-period day is one on which the French electricity system faces particularly high stress. Under this method, monthly lower and upper limits and a guide curve help balance the distribution of days through winter. The curve represents an average profile for red days and is intended to reduce the risk of selecting a long run of days late in a season to meet the quota.

CRE’s examination of 1,400 forward-looking scenarios is not a definitive forecast of every future winter. The regulator reported that in 90% of scenarios, the residual-consumption ratio for the selected 22 days was above 93%, and in 90% the number of “apurement” days remained below three. These are results within a scenario set, not observed outcomes. The decision explicitly cautions against treating the statistical exercise as deterministic.

A separate rule for holiday eves

The decision excludes 24 and 31 December from red-day selection. Those dates can have high system load, but CRE judged that a very high-price signal on holiday eves could weaken acceptance of Tempo offers and discourage customers from staying in them. If system stress occurs, RTE’s Ecowatt signal can be used; CRE says this can call on voluntary conservation and solidarity. The decision does not claim the electricity system will be unconstrained on holidays; it assigns different roles to two signals.

The quota remains 22 red days, with 43 white days and 300 blue days. Those counts describe the annual distribution of Tempo colour categories, not tariff prices or the total cost of a colour. The new decision focuses on the red-day selection method and excluding two December dates. CRE also considers it appropriate to exclude the same dates from peak-period selection in the capacity mechanism, seeking consistency between the signals.

The notification timetable changes later

The new algorithm and holiday exclusion take effect on 1 November 2026. The timing of advance notice to customers will not change immediately. CRE gave RTE and suppliers time to adapt their information systems and procedures: publication of red-day notices as early as two days ahead when possible, within one hour of peak-period selection, is set to start on 1 November 2027. Until then, the existing arrangement remains: RTE announces the day’s colour at 10:30 on the previous day.

RTE expects to select peak-period days by noon on J-2 in most cases; under the new rule, red-day information will appear on a public page within an hour of that selection. Optional automatic notifications can complement the page. The decision staggers two changes: the algorithm and the 24/31 December exclusion begin in the 2026 winter, while earlier notification begins in winter 2027. Customers should not count on the new advance-notice period before that second change takes effect.

How to interpret consumer and system effects

CRE defines an “apurement” day as a red day drawn to meet a period’s quota that may not coincide with high residual consumption. Such days can arise from monthly lower and upper “tunnels” under the new algorithm or from filling the quota at the end of winter under the former Tempo method. The comparison therefore considers not only average efficiency but also how often the quota requires an extra calendar day. Under the new method, monthly limits and a guide curve are used to balance selecting days that match system stress with giving market participants advance visibility.

The decision does not itself set Tempo price tables or determine what a household will pay on a red day. A bill depends on the subscribed offer, when electricity is used and the applicable unit prices. CRE changed the selection task and rules; it did not revise day-specific prices in this decision. The white-day algorithm also continues, using the latest prospective data. Whether a household saves money therefore depends on its tariff and consumption data.

Operational responsibility and the transition

The decision leaves responsibility for selecting red days with RTE while changing the signal it uses. RTE will assess residual-consumption and production forecasts against the peak-period calendar used in the capacity mechanism. Tempo remains a separate customer tariff calendar, but its high-stress-day definition will draw on a signal already used by the system operator. CRE said the change affects suppliers’ offers and customer information as well, which is why it set different start dates.

The transition period for suppliers’ notice channels and digital systems means that information to customers will not change the day after the regulator’s decision. RTE will use the new algorithm from 2026; the aim of transmitting a selected day earlier begins in 2027. The decision qualifies J-2 notice with “when possible”: operational timing may not allow two-day notice for every red day, so that interval is not an unconditional guarantee. The distinction separates the technical start of the algorithm from the start of routinely longer advance notice.

Data

Key figures

Tempo red-day quota and method comparison

Day counts and algorithm evaluation in CRE’s decision of 21 October.

Number of red days in the Tempo option
22 days
2026-10-21 · Target
Number of white days in the Tempo option
43 days
2026-10-21 · Target
Number of blue days in the Tempo option
300 days
2026-10-21 · Target
Consecutive red working days selected in March 2026, excluding weekends
13 days
2026-03 · Observed
Efficiency ratio for the new method in the four-winter simulation
94 percent
2026-10-21 · Estimate
Efficiency ratio for the former Tempo algorithm in the four-winter simulation
95 percent
2026-10-21 · Estimate
Maximum apurement days for the new method in the four-winter comparison
3 days
2026-10-21 · Estimate
Methodology

Day counts describe the Tempo rule, not prices. Efficiency and apurement figures are from CRE’s retrospective algorithm simulation for the last four winters; they are not customer savings or a deterministic forecast. The 13-day figure is the run of red working days selected in March, excluding weekends.

Updated:

Timeline

Effective dates for Tempo rule changes

Dates in the CRE decision for the red-day algorithm, holiday exclusion and earlier notice.

  1. · Scheduled

    Peak-period algorithm for red days and 24/31 December exclusion

    The new selection method and holiday-eve exclusion take effect.

  2. · Scheduled

    Earlier red-day notification

    When possible, red days are to be announced two days ahead and published within one hour of selection.

Methodology

Dates are transcribed from page 9 of CRE’s 21 October decision. The algorithm and 24/31 December exclusion begin in 2026; the earlier-notice rule starts in 2027.

Updated:

Structured coverage

Subjects and places

Subject proposals

Geographic references

Only source-provided geographic references are shown. Opening an external map is optional. Optional story maps use OpenStreetMap. Opening a map sends your IP address and this site’s address to the map provider; location data remains readable as text without loading the map.

  • France · Place role: Coverage · Place type: Country or area · Location precision: Regional
    Evidence
Taxonomy version: IPTC Media Topics 2026-Q2

Continue reading

Energy

CRE puts Mayotte grid funding at €12.3m–€26.2m a year in 2027–2029 consultation

France’s energy regulator published a consultation on 22 October that places annual electricity equalisation funding for Mayotte grid operator EDM in a €12.3 million to €26.2 million range for 2027–2029. EDM’s €56.5 million annual cost request is not an approved expenditure or a final funding decision.

Commission de régulation de l’énergie (CRE)7 min read Data included
Energy

CRE approves RTE’s revised 2026 grid investment programme at €4.09 billion

France’s energy regulator approved a €4.09 billion revision to transmission operator RTE’s 2026 investment programme, 3.5% below the plan approved in February. CRE also reviewed actual 2025 spending and variances across project categories.

Commission de régulation de l’énergie (CRE)6 min read Data included